User guide

IOPRINT+ Print Servers
Configuration Screens
Page 221
TCP/IP screen
Item Description
IP Address Enter the IP Address assigned to this IOPRINT+ Print
Server. If using dynamic IP Addresses (DHCP, BOOTP,
rarp), this address should be left at 0.0.0.0.
Router (Gateway) IP
Address
If your network segment has a router, enter the router
address here.
If there is no router, leave the address as 0.0.0.0.
Network Mask If the Gateway Address above is 0.0.0.0 the Network
Mask should also be left at 0.0.0.0.
If you have a router, enter the Network mask (Subnet
mask) for the segment to which the IOPRINT+ Print
Server is attached.
Delay before reconnection
attempts
Sets how long the IOPRINT+ Print Server should wait
before retrying a TCP/IP connection which is lost.
Allowable values are from 0 to 255 seconds, with 2 as the
default.
Number of reconnection
attempts
Sets how many attempts at reconnection will be made.
After that, the TCP/IP session will be terminated.
Allowable values are from 0 to 255, with 254 as the
default.