User guide

IOPRINT+ Print Servers
Using PSConfig - NDS Mode
Page 196
Installation
Simply copy the file PSCONFIG.EXE file from the \Utility\Dos directory on the CD-ROM to
your workstation's hard disk.
Using psconfig
To use PSConfig to change IOPRINT+ Print Server settings, follow this procedure:
1. Run PSConfig. A list of IOPRINT+ Print Server units will appear.
2. Select the IOPRINT+ Print Server you want to setup, then press Enter.
3. Select Change Configuration. A list of category configurations will appear.
4. Select the category you want to edit, then press Enter.
5. Select the item you want to edit and press Enter. If you are prompted to enter a character
string, enter a string.
6. Change any other items you wish. The Esc key will return you to main menu to select
another category if you wish.
7. Select Execute Change and press Enter to save the configuration changes.
Configuration data
This sections explains the configuration data required by the IOPRINT+ Print Server, and
how this data is linked to the NetWare server configuration.
Novell printer
numbers (print
Server Mode)
In NetWare Print Server mode, NetWare printer numbers match IOPRINT+ Print Server ports
as follows.
Novell Printer Number IOPRINT+ Print Server Device Port
Printer number 0 Parallel Port 1
Printer number 1 Parallel port 2
Printer number 2 Parallel port 3 OR the serial port.