User guide

IOPRINT+ Print Servers
Using PSConfig- NetWare Bindery Mode
Page 192
Associate Printers
with Print Queues
3. Associate Printers with Print Queues
a. Select Queues Serviced by Printer.
a. Select a printer you want to assign a print queue to.
b. Press INS.
c. Select the queue that you want the printer to service, and press Enter.
d. Repeat until all printer and queue associations are configured.
e. Exit PCONSOLE
Configure the
IOPRINT+ Print
Server
4. Configure the IOPRINT+ Print Server
f. Run PSCONFIG program
g. Select the appropriate IOPRINT+ Print Server device from the list.
h. Select Set to NetWare Remote Printer Mode
i. For all print ports, enter the "NetWare Print Server Name" you selected in Step 2.
j. Select Execute Setup to save your changes.