User guide

IOPRINT+ Print Servers
Using PSConfig- NetWare Bindery Mode
Page 190
Procedure NetWare V4
For NetWare V4, you can use Quick Setup instead of the procedure above, to configure the
IOPRINT+ Print Server in Print Server Mode.
The procedure is as follows:
Configure
NetWare
1. Login as ADMIN. or a user with Admin. rights.
a. Run the PCONSOLE program and press [F4] to switch to bindery mode.
b. Select Quick Setup
c. Enter the desired names in the following fields:
Print server
New printer
New print queue
d. Press [F10] to save.
e. If necessary, repeat for parallel ports 2 and 3 or the serial port.
Configure the
IOPRINT+ Print
Server
2. Configure the IOPRINT+ Print Server
a. Run the PSCONFIG program
b. Select your IOPRINT+ Print Server.
c. Select Set to NetWare Print Server Mode.
d. Select the file server you logged on in step 1. to be the master file server.
e. Replace the IOPRINT+ Print Server name with the name set in step 1.
f. Select Execute Setup.