Manualshelf

User guide

ManualsBrandsChase Research ManualsComputer equipmentIOPRINT+ Print Server
181182183184185186187188189190
IOPRINT+ Print Servers
Using PSConfig- NetWare Bindery Mode
Page 189
Configure the
IOPRINT+ Print
Server
5. Configure the IOPRINT+ Print Server
a. Run the PSCONFIG program.
b. Select your IOPRINT+ Print Server.
c. Select Set to NetWare Print Server Mode.
d. Enter the file server you are logged onto, to be the master file server to the
IOPRINT+ Print Server
e. Replace Print Server name with the name used on the NetWare server in step 2.
f. Select Execute Setup to save your changes.