User guide

IOPRINT+ Print Servers
Using PSConfig- NetWare Bindery Mode
Page 187
Configuration - Print Server Mode
This section describes how to configure both the NetWare Server and the IOPRINT+ Print
Server for Novell Print Server Mode operation.
Before you begin, please note the following information:
Novell Printer Numbers
NetWare printer numbers match device ports as follows.
Assigning users to
printer queues
If new printer queues are created, users needing to use the print queues may need to be
designated as queue users by using PCONSOLE.
Novell Printer Number Device Port
Printer number 0 Parallel Port 1
Printer number 1 Parallel port 2
Printer number 2 Parallel port 3 OR the serial port.