User guide

IOPRINT+ Print Servers
Using PSConfig- NetWare Bindery Mode
Page 185
IOPRINT+ Print Server Data
The IOPRINT+ Print Server requires the following "General" data, and the data for the mode
(Print Server or Remote Printer) you are using.
General
Item Description
Device Name The default name is shown on a sticker on the base
of the device, in the form SCxxxxxx (SC followed by
6 digits). Change this if you wish. The new name
MUST NOT exceed 19 characters, nor contain any
spaces.
Device Password Default is NULL (no password).
NetWare Mode Print Server or Remote Printer.
Frame Type Select the frame types used by your network.
(Ethernet 802.2, Ethernet 802.3, Ethernet SNAP,
and Ethernet II)
By default, all frame types are enabled.