User guide

IOPRINT+ Print Servers
BiAdmin - NetWare Configuration with Client 32
Page 176
To assign
operators to the
Print Queue
(Optional)
To assign Operators to the selected queue, select Operators from Assign Queues (NDS PS
mode). This step is optional; operator assignment has no effect on operation of the
IOPRINT+ Print Server.
The current Queue and Context are displayed at the top of the screen.
Use the Change Context button to change the current context. The Available Operators list
on the right will then change to show the queues available in that context.
Assign an operator by selecting them on the right, and clicking the "<<" button.
Remove an assignment by selecting the operator from the list on the left, and clicking the
">>" button.
Password (NDS)
button
Clicking the Password button on the screen shown in NetWare Configuration (NDS PS
mode) allows you to simultaneously change the NetWare password for the Master File
Server, and the NetWare login password stored in the IOPRINT+ Print Server. (The
IOPRINT+ Print Server must be able to login to the NetWare server.)
You will see a screen like the example below.
Enter the old (NetWare) password, and enter the new password in both fields provided. If the
printer object has been created by BiAdmin, the Old Password will be blank. In that case,
leave this field empty. The new password will be saved both on the NetWare server and the
IOPRINT+ Print Server.
Note
If you select Operator from NetWare Configuration (NDS PS mode), you will see a similar
screen, which allows you to assign users to the Printer Object, rather than the Printer
Queue.