User guide

IOPRINT+ Print Servers
BiAdmin - NetWare Configuration with Client 32
Page 164
NetWare
Configuration
Button (Bindery)
Clicking the NetWare Configuration button will reveal one of the following screens:
If you have multiple File Servers: You will see this screen:
This screen allows you to set the IOPRINT+ Print Server to service additional file servers.
Normally, the IOPRINT+ Print Server will service only the Master File Server.
The right column lists any available servers. Note that to be available, you must be logged
into the Server with Supervisor rights.
Use the "<<" and ">>" buttons to move file servers to and from the Serviced Fileserver list on
the left.
When completed, click Next. This will create a NetWare Print Server object on the Serviced
Fileserver if it does not yet exist. The NetWare Print Server will have the same name as the
NetWare Print Server on the Master File Server.
After clicking Next, you will see the screen below.
If you have a single File Server:
Clicking the NetWare Configuration button will reveal the following screen: