User guide

IOPRINT+ Print Servers
BiAdmin - NetWare Configuration with Client 32
Page 160
Preparation
1. Ensure that you are logged into the NetWare server(s) you wish to use. You need to have
ADMIN rights so you have permission to create printer objects and queues.
2. Start BiAdmin
3. Select a IOPRINT+ Print Server from the list.
4. Select the NetWare icon
5. From the resulting screen, shown below, select the operating mode to match your
NetWare server, and click Configure.
6. Depending on your selection, you will see one of the following screens.