User guide

IOPRINT+ Print Servers
BiAdmin - NetWare Configuration without Client 32
Page 156
Print Server Mode
If Print Server is selected above, then clicking Configure will reveal the following screen.
Field descriptions
Field Description
Selected Device The name of the current IOPRINT+ Print Server
Print Server
Name
For convenience, you can change the name of the IOPRINT+
Print Server on this screen, by entering a new name in this field.
This becomes the NetWare log-in name for this device.
NDS Tree Name
(NDS Mode only)
The File Server's NDS tree name (root name).
Select from the drop-down list.
Print Server NDS
Context
(NDS Mode only)
Path to the NDS Context. This does not include the Context itself,
and each OU should be separated by a period.
e.g.
department.company
Master File Server
(Bindery Mode
only)
Name of the IOPRINT+ Print Server's master file server (NetWare
server).
Select from the drop-down list.
Polling Queue
Interval
Defines how often the IOPRINT+ Print Server will poll the queues
to be serviced.
Job Notification by
Connection ID
Set to Yes to receive a job notification at only the workstation
where the print job originated, No to receive a job notification at all
workstations that you have logged on.
NetWare
Password
The password on the NetWare Print Server. The device needs
this password to connect to the NetWare server.
Polling Queue
Interval
Defines how often the IOPRINT+ Print Server will poll the queues
to be serviced.
Job Notification by
Connection ID
Set to Yes to receive a job notification at only the workstation
where the print job originated, No to receive a job notification at all
workstations that you have logged on.