User guide

IOPRINT+ Print Servers
Introduction
Page 151
Menu Options
Status Menu
InitDevice Menu
Menu option Description
Device Info Same as Device button.
Display all the configuration and status information about the selected
IOPRINT+ Print Server. The data is presented in a scrolling, read-only
window.
Port Same as Port Status buttons.
Select the desired port, to view a screen similar to Printer Status.
Menu option Description
Attach Remote This is used to connect to a IOPRINT+ Print Server device on another
LAN segment. You will see the screen below.
Enter the IP address of the remote device. If found, the IOPRINT+ Print
Server will then appear in the device list.
Connected
Protocol
This option allows you to designate which LAN protocol will be used for
communication between the selected device and this application. You
should select ONE protocol only.
Find Use this option to locate a IOPRINT+ Print Server on the LAN. Simply
enter the Default Name (as shown on a sticker on the base, in the form
SCxxxxxx) for the IOPRINT+ Print Server you wish to locate.
Reset Device This will cause the device to reboot. This should be done after making
any configuration changes, or if the device stops responding after some
problem.