User guide

IOPRINT+ Print Servers
Introduction
Page 147
NetBEUI Settings
Item Description
Domain name Enter the designated work group to be serviced by the
IOPRINT+ Print Server. Using only UPPER CASE is
recommended, because the IOPRINT+ Print Server is
not case sensitive, and will ignore case.
Response Time Sets how fast jobs are sent to the printer. The default
value of zero (0) delay should be increased only if your
printer cannot cope with no delay.
Abort Job As Paper
Out
YES will terminate the current print job when a printing
error is encountered. NO (default) will try to continue but
may cause print errors. If errors occur, try setting this
value to YES.
Note
Normally, there should be no need to adjust these settings.