User guide

Windows Peer-to-peer - TCP/IP
Page 129
Chapter 2 Installation and Configuration
6. Change the port name if you wish, and set the banner options.
7. Set the Printer to use this new port
a. Go to Printer Manager. Select Printer- Create Printer.
b. Select the appropriate printer driver for the printer connected to the first port on the
IOPRINT+ Print Server.
c. In the Print to dialogue box, select the port name you assigned to the IOPRINT+
Print Server port in step 3.
d. If you click on Settings, you will see the Configure Print Server window again.
8. Follow the on-screen instructions to finish adding a printer as normal. Do NOT click the
Share This checkbox for this printer.
9. You can now print using this printer.
Item Description
Device Name Click Browse and select the correct IOPRINT+ Print Server.
The name shown will be in the form SCxxxxxx (SC followed
by 6 digits), as shown on a label on the base of the
IOPRINT+ Print Server. The name can be changed if you
wish, but it is only visible when configuring the device.
Select Device Port Select the IOPRINT+ Print Server port that the printer is
connected to (e.g. Parallel port 1).
Port Name On multi-port devices, each port must have a unique name
(8 alpha-numeric characters). The Port Name will be shown
in the Printer's properties. Use a name which indicates the
port used (e.g. Par_1)
Enable Banner Select this option to enable a banner page.
PostScript If using a PostScript Printer, check this box.
User Name The name to be printed on the banner page.
Retry Interval Sets how often Windows will poll the IOPRINT+ Print Server
to establish a connection when the printer is busy. Values
range from 40-110 seconds.