User guide

Windows Peer-to-peer - TCP/IP
Page 128
Chapter 2 Installation and Configuration
Windows NT 3.51
The setup program will do the following:
• Create the following icons: Readme and UnInstall.
• Add the driver, prtserv.dll, to the Windows\System32 directory.
• Add the Uninstall program to the Windows directory.
• Add Uninstall information files and the Readme file to the installation directory.
1. Before proceeding, check the following:
• IOPRINT+ Print Server is installed, and ON.
• Printer(s) connected to the IOPRINT+ Print Server, and on-line.
• LAN is operational and using the TCP/IP protocol.
2. Run the SETUP program in the Driver\ptp_95nt folder on the CD-ROM.
3. At the Select Components window, select the TCP/IP protocol.
4. Once TCP/IP is selected, the Select Components screen will present 2 options:
• Install Device Driver
• Install SETBOX Program
5. Select Device Driver. This needs to be installed on all workstations. (Select SETBOX
only if you need this program to assign IP Addresses to the IOPRINT+ Print Server.)
The Configure Print Server window will appear. An example screen is shown below.
Items shown on this screen are as follows.