User guide

Windows Peer-to-peer - TCP/IP
Page 122
Chapter 2 Installation and Configuration
4. Select Other as the type of port you want to add and select the IOPRINT+ Print Server's
port.
5. Then click OK and the Configure PrintServer window will appear.
6. Enter the configuration information as for the first port. Ensure that you select a different
IOPRINT+ Print Server port each time, and assign a unique name to that port (e.g.
pserv_2 for parallel port 2).
7. Repeat steps 3. to 6. until all IOPRINT+ Print Server ports have been added.
8. Install the correct printer for each port. When prompted with the following screen, ensure
that you select the port to which the printer is connected.
Configuration is now complete; you can now print using the printers attached to the
IOPRINT+ Print Server.