User guide

Windows Peer-to-peer - SMB
Page 113
Chapter 2 Installation and Configuration
Software Installation
No software installation is required.
However, your may wish to install either WPConfig (for Windows 3.1) or BiAdmin (for
Windows 95/98/NT). This will enable you to:
• Insert a Workgroup Name in the IOPRINT+ Print Server's NetBEUI data. If a name is not
inserted, the device may not appear on a network "Browse".
• Change the name of the IOPRINT+ Print Server, set the network protocols in use, config-
ure the serial port (if it exists) and perform other management tasks.
• Monitor the attached printers.
• If using BiAdmin with bi-directional printers, configure the attached printer(s).
Refer to Appendix A BiAdmin Management Program or
Appendix E WPConfig management program for details on installing and using these
programs.
PC Configuration
Use Control Panel - Network to check that your PC has the NetBEUI protocol installed; use
the Add function to add the NetBEUI protocol if necessary.
Before printing using the printer connected to the IOPRINT+ Print Server is possible, the
printer must be created or added in the Windows environment, as explained in the following
sections.