User guide

Windows Peer-to-Peer - NetBEUI
Page 100
Chapter 2 Installation and Configuration
Installing Additional Ports on Multi-port Models
If you are installing a multiple port IOPRINT+ Print Server, you must add additional ports and
printers. To do so, use the following procedure.
1. Go to the Printers folder and click on the printer just added. Select Properties, then the
Ports tab as shown below.
2. Select Add Port and select the IOPRINT+ Print Server's port as the port to add.
3. Enter the configuration information as for the first port. Ensure that you select a different
IOPRINT+ Print Server port each time, and assign a unique name to that port.
4. Repeat steps 2. and 3. until all IOPRINT+ Print Server ports have been added.
5. Install the correct printer for each port. When prompted with the following screen, ensure
that you select the port to which the printer is connected.
Configuration is now complete. You can now print using the printers attached to the
IOPRINT+ Print Server.