User guide

IOLAN+, IOLAN+ Rack & IOLAN+ 102/104 User guide
The Menu System
Page 42
Chapter 2 Installation
The Connections Menu should now be displayed.
This menu displays the current state of the four possible connections. There are no active
connections.
The firmware version of IOLAN+ is located on the lower left hand portion. The wording
‘REMOTE-ADMIN’ in the upper right signifies you are remotely telneted into IOLAN+ (and
will read ‘Terminal: 1’ if you are using a terminal/PC into port 1.)
The keys used to move about in the menus depend on the terminal emulation you are using.
The arrow keys should all work. The TAB key is very important for moving between fields.
Backspace and DEL should work, but depend on the emulation.
ESC (the escape key) will move you back one menu.
An accelerator key can be used to jump to an option within a menu and is the first letter of the
option.
Note
If there is a problem with your emulation, you can try a different
emulation mode. See Appendix D Troubleshootingfor more
information.