User guide

IOLAN+, IOLAN+ Rack & IOLAN+ 102/104 User guide
Standard Terminal/PC cables
Page 214
IOLAN+ Rack and IOLAN+ 102/104 RJ45 DTE to PC DB9 DTE
Typical uses This type of cable is used to connect to DTE devices such as PCs. Perle provides a RJ45-
DB9 convertor for IOLAN to PC DB9 Female accessory. It allows a standard CAT5 patch
cable to be connected to the IOLAN and a DTE device (PC) attached to the DB9 Female
connector with the appropriate pin-outs. See Perle’s website www.Perle.com for ordering
information.
Cable diagram
Connector pinout table
Pin 1
(looking into
connector)
Pin 1
(looking into
connector)
Male
Female
RJ45 (IOLAN+) DB9 (PC)
Pin Signal Direction Description Pin Signal Description
4 TXD Out Transmit Data 2 RXD Receive Data
5 RXD In Receive Data 3 TXD Transmit Data
6 GND Ground 5 GND Ground