User guide

IOLAN+, IOLAN+ Rack & IOLAN+ 102/104 User guide
Command descriptions
Page 167
help
Syntax: help
Description: This function provides syntax descriptions and partial descriptions of the available
commands.
host
Syntax: host <[add name address][delete name]>
Description: This function allows the administrator to add and remove names from the host table. The
name can be anything up to 18 characters long, and the address field is the IP address of
that host. There can be a maximum of 10 entries in the host table. Admin level required to
change.
kill
Syntax: kill <port number>
Description: This function allows the user to reset their own port, or the administrator to kill any other
ports. When kill is issued any existing sessions are terminated and the port set back to its
starting state. Admin level required.
lock
Syntax: lock
Description: This function allows the user to lock his terminal using a specific password. IOLAN+ prompts
the user for a password and a confirmation. This function can not be used unless the Lock
enable flag is set (via set port command).
logout
Syntax: logout
Description: This function causes the user to exit IOLAN+. The unit closes down any sessions and resets
the port. Same as exit.
prov
Syntax: prov
Description: This function displays the network status of each IP provider and is used for troubleshooting.