User guide

IOLAN+, IOLAN+ Rack & IOLAN+ 102/104 User guide
Host Address menu
Page 150
Chapter 10 The menu interface
Host Address menu
IOLAN+ uses the information entered on the Host Address Menu to form an internal host
table. The user can then use the host name in any of the IOLAN+ functions or menus.
The parameters are as follows:
Kill command
The kill command resets the port but keeps the previously defined configuration. This is used
when you change certain parameters or for when ports get stuck.
Parameter Description
Host name This field specifies local name you want to give a particular host on the
network.
IP Address This field defines the IP address of the host designated above.