User guide

IOLAN+, IOLAN+ Rack & IOLAN+ 102/104 User guide
Access menu
Page 147
Chapter 10 The menu interface
Maximum Login Attempts The maximum number of login attempts a user is allowed
before the line is reset. For modem users the control line DTR
is toggled, the port is disabled for 3 seconds. Default is 3.
Login Timeout This time defines the maximum time in seconds for the user to
enter authentication information, once login time-out is
exceeded the line is reset.Default is 0.
Disconnect Probe An option to keep the per port authentication connection up
during the clients’ session. Default is Yes. This allows a user
connect time to be measured by a simple ‘do nothing’ telnet
session.
Log Username The logger’s user name for gaining access to the log file on
the host. Log File The pathname of the activity log file.
Log Power Up/Down Logs port connection status to the log file (for example, for
Dial-in users). Default is No.
Log User Login/Logout Logs a message to inform the host when IOLAN+ is powered
up and when rebooted from software. This logs an ‘I am alive’
message every five minutes. Default is No.
Log Port Connect/
Disconnect
Record users logging into authentication host on the log file.
Also records failed login attempts. Default is No.
Log User Service Start/
Stop
Logs starts and stops of PPP or SLIP. Default is No.
Parameter Description