User guide

IOLAN+, IOLAN+ Rack & IOLAN+ 102/104 User guide
Access menu
Page 144
Chapter 10 The menu interface
Remote site devices
This first brings up a pop-up menu with 16 possible UNUSED ENTRYs each corresponding
to a port.
The parameters are as follows:
Parameter Description
Type This is the name of the modem assigned to a specific port. It is
referenced from the Remote Access Systems Screen in the Device
type field.
Scr Addr This is the source IP address of the port for remote access/modem
configuration. If blank, the IOLAN+ IP address is used.
Dst Addr This is the destination IP address of the port for remote access/
modem configuration. If blank, the remote host must supply the IP
address. If filled in, you designate an assigned IP address to loan
the remote host. If the secure field on the Port Menu is No, this can
be overridden by the incoming host.
Config This is the modem’s setup string. There are a few examples at the
end of this document.
Note: Leave this field blank for directly connected devices.
Dial Comm This is the modem’s dial command.
Hang Up This is the modem’s hang up command.