User guide

IOLAN+, IOLAN+ Rack & IOLAN+ 102/104 User guide
Port setup menu
Page 133
Chapter 10 The menu interface
Flow control
This section defines the various flow control options used by IOLAN+. This section is always
used. The parameters are:
Option Description
Flow Ctrl This field defines which method of flow control to be
used by this port, either XON/XOFF, HARDWARE,
BOTH, none or WANG. To use HARDWARE flow
control the correct cable must be used (see
Appendix E Cabling. WANG is a special option
designed for WANG terminal flow control applications.
The default is to use XON/XOFF.
Input Flow This field allows you to define if the input flow control is
to be used. Default is Enabled.
Output Flow This field allows you to define if the output flow control
is to be used. Default is Enabled.