Product specifications

93
The Menu Interface
Remote Site
Devices
Like the Remote Access Systems Screen , the Remote Site
Devices Screen
also first comes up with UNUSED ENTRY
(each corresponding to a port, 1 through 8 or 1 through 16).
** Administrator ** REMOTE SITE DEVICES SCREEN REMOTE-ADMIN
Type [Netchasr]
IP Addresses
Src Addr [ ]
Dst Addr [204.17.209.212 ]
Modem
Config [at ]
Dial Comm [atdt ]
Hang Up [+++ath0 ]
PPP Configuration Dialer Configuration
Restart timer [1 ] Dial Timeout [25]
Max Retries [5 ] Dial Retries [2 ]
Inactivity [0 ]
________________________________________________________________________________
Figure 35: Remote Site Devices Screen.
The parameters are as follows:
Type This is the name of the modem assigned to a
specific port. It is referenced from the
Remote
Access Systems Screen
in the Device type field.
Scr Addr This is the source IP address of the port for
remote access/modem configuration. If blank,
the IOLAN+ IP address is used.
Dst Addr This is the destination IP address of the port for
remote access/modem configuration. If blank,
the remote host must supply the IP address. If
filled in, you designate an assigned IP address to
loan the remote host. If the
secure field on the
Port Menu is
No , this can be overridden by the
incoming host.