Product specifications

77
The Menu Interface
Connection Host
1 *** FREE ** === Commands ===
2 *** FREE ** | Telnet ^T|
3 *** FREE ** | Rlogin ^R|
4 *** FREE ** | Port ^P|
| Admin mode ^A|
| CLI |
| Lock |
| Logout ^D|
================
________________________________________________________________________________
This option allows you to configure parameters affecting
the Server box, eg hosts table, other terminals.
IOLAN+RACK v4.01 a CDi IOLAN+
Figure 29: Commands pop-up menu (for Connection Menu).
Pressing at any of the four FREE fields presents the
Commands pop-up menu. If it was not free, the Telnet and
Rlogin fields would have been replaced by Close connection
and Resume connection signifying there is a session present.
The
* ** FREE *** message would be replaced by the name or
IP address of the connected host.
The following describes the options that can appear in the
above menu:
Telnet This option allows you to make a connection to a
specified host on the network using
telnet . When
this command is selected, another pop-up menu
appears, giving you the host table list. In addition,
there is a
specify host/IP address option you can
use for other IP addresses and host names.
Rlogin This performs the same function as the Telnet
open command, but uses the Rlogin protocol.
While
Telnet is the most commonly used protocol,
Rlogin can also be used (especially over WAN
connections because
Rlogin packets are smaller).