Product specifications

39
Modem Authentication & Logging
Authentication Port: The TCP service to be used for
authenticating users. Normally this is set
to
23 for Telnet.
Login Prompt: The string used by IOLAN+ to know
when to send the login ID. Set this field
to
ogin:. Leave out the first letter as some
systems use a ‘L’ and others use a ‘l’ as
the first letter.
Password Prompt: The string used by IOLAN+ to know
when to send the users password. Use
‘ssword’ as depicted above.
Success Indication
String:
The string used by IOLAN+ to determine
if the login ID and Password were valid
and the login process was successful.
Normally you will see the string ‘Last’
after successfully logging in.
Failure Indication
String:
The string IOLAN+ will look for to
determine that the Login ID or Password
were invalid. You will normally see the
word ‘invalid’ or ‘incorrect’ as part of the
failure message from the host.
Maximum
Login Attempts:
The number of login attempts IOLAN+
will allow the user to make before
dropping the call.
Login Timeout:
This defines the amount of time in
seconds IOLAN+ will wait for the user to
provide a login ID and password before
dropping the line.
Disconnect Probe: This option determines whether
authentication probe logins will be
terminated on completion of
authentication.