Product specifications

110
IOLAN
+
- User and Administration Guide
The command will use telnet or rlogin
depending on what is set in the
Options section
of the
Port Menu .
Example:
IOLAN> connect
Host/IP Address> microart
TCP Port> 23
Note: If the user presses the return at the port prompt,
the unit defaults to port 23 which is the standard
telnet port (or 513, the standard rlogin port). This
option is not available when using remote
administration or if the port
secure mode is WAN.
COPY Syntax: copy <source port> <destination> [destination]…
Description: This command copies one port setup to another
allowing easy setup if the ports are the same
configuration. Administrative level is required
to change. Note that multiple destination ports
can be specified separated by spaces.
DIAL
Syntax: dial
Description: This command shows the status of the dial-out
interface and would be used for monitoring
dial-out connections.
DISCONNECT Syntax: disconnect <session-number>
Description: This command allows a user to disconnect (close)
one or all of their existing TCP connections.
EXIT Syntax: exit
Description: This function causes the user to exit the
IOLAN+, closing down any sessions and
resetting the port.