User's Manual

46
8.18. Security Screen
This screen sets the password for the Vision Screener and set the lock mode.
You can go into the Security Screen by pressing on the (Security) button in the Setup
Screen.
1. Yes: Press Yes and set the password to enter Lock mode at boot time, and then the screen is turned off
according to the screening time, and then lock mode is executed.
2. No: Press No and enter the password you set to unlock the lock mode.
Sleep mode and Lock mode(Input the password) are started according to the time set by the option and the user
input is not available at the start of the Application.
!
NOTE