User Instructions

Register Plate
With Soot Door
Alternative
Soot Door Positions
Fig. 12 Horizontal Register Plate With Optional
Vertical Rear Flue Connector
158mm Island 2
197mm Island 3
INSTALLATION INSTRUCTIONS
®
Horizontal lengths of flue must be kept to a minimum and should
not be more than the flue diameter. The sealing face of the flue
collar should be coated with fire cement before fixing to the body of
the stove using the two screws provided. The blanking plate must be
removed, sealed with fire cement and refitted, care being taken to
ensure that the fold on the clamping plate is in line with the lugs on
the firebox as shown on the label on the clamping plate. Ensure that
the clamping plate does not prevent the throat plate from seating
correctly. All flue connections must be well sealed.
SOOT DOORS
It is possible to pass a 16 inch diameter sweeps brush through the
appliance but in most back outlet installations it will be necessary to
have a soot door to enable the chimney to be swept. This may either
be in the actual brickwork of the chimney or in the register plate.
Various types and positions of soot doors are shown in figs. 9 to 12.
PRE LIGHTING CHECK
Before initial lighting the following points should be checked:
1. The bottom grate bars must all be fitted and should move freely and
easily when the ridding mechanism is operated.
2. The plates round the sides and back of the grate must be in position
and sitting correctly.
3 The throat plate must be fitted in the roof of the appliance and should
be checked to ensure that it has not become dislodged in transit. The
method of location and positioning of the throat plate is shown in Fig. 8.
12
COMMISSIONING
On completion of the installation and after allowing a suitable period
of time for the fire cement and mortar to dry out, the stove should
be lit and checked to ensure that smoke and fumes are taken from the
appliance up the chimney and emitted safely. Also check all joints and
seals. On completion of the installation and commissioning please
leave the operating instructions with the customer and advise them on
the use of the appliance.
charnwood
I S L A N D
IIIII