User Instructions

16
®
INSTALLATION INSTRUCTIONS
9. SECURE THE FLUE ADAPTORS
Working through the stove, line up the inner flue collar to meet
the upper flue collar, carefully easing the ends of the coach bolts
through the holes. Fit the nuts onto the ends of the coach bolts and
tighten.
Check that the flue pipe is not obstructed or restricted in any way
and that all joints are well sealed.
10. ATTACHING THE BAY 5- 5GT FRAME
Finally, fit the frame to the front of the stove.
First, hold the top and bottom pieces in place.
The two side panels fit onto the top and
bottom pieces and hold the frame together.
Slot into position and screw into place with a
countersunk screw.
Ensure the firebox is central in the casing and
that the door handle operates correctly. If
necessary, adjust the firebox position in the
casing.
ATTACHING THE BAY VL FRAME
The enamel frame is one piece and is fitted to
the front of the stove. Slot the frame into
position and screw into place using a button
head allen screw, as shown in the diagram
below. Take care not to over tighten the allen
screw as it can damage the enamel finish.
Secure with nut here
Sealed with 8mm
self-adhesive rope seal
Upper flue collar
Convection casing
Flue pipe
Wall of stove
Inner flue collar
charnwood
BAY
Bay & Bay 5GT
Top frame
Side
frame
Bay VL