Use and Care Manual

22
ASSEMBLY STEPS
Choose a good, cleared assembly
area and get a friend to help you
put your side island together.
Step 1
Attach the tray assembly to the
base stand by using four
M6 x 12mm bolts. Make sure the
sliding tray faces forward.
Step 2
Slide the two tray brackets into
the slots which are located at
the tray slide.
Extensions
(4) Bolts
1 Screwdriver
4 M8 Full Thread Studs
4 M8 Washers
PARTS CARD CONTENTS
Make sure you have all items listed under PARTS LIST and PARTS CARD CONTENTS before
you begin the installation process. Your Parts Card will include:
Qty.
Screwdriver
M6 x 12mm Bolts M8 Full Thread Studs
M8 Nuts
M8 Washers
14 M6 x 12mm Bolts
4 M8 Nuts
INS_814-6820-0_Side Isle_ENG-SPN 3/8/06 9:54 AM Page 4