Instructions / Assembly
22
ASSEMBLY STEPS
Choose a good, cleared assembly
area and get a friend to help you
put your side island together.
Step 1
Attach the tray assembly to the
base stand by using four
M6 x 12mm bolts. Make sure the
sliding tray faces forward.
Step 2
Slide the two tray brackets into
the slots which are located at
the tray slide.
Extensions
(4) Bolts
1 Screwdriver
4 M8 Full Thread Stud
PARTS CARD CONTENTS
Make sure you have all items listed under PARTS LIST and PARTS CARD CONTENTS before
you begin the installation process. Your Parts Card will include:
Qty.
Screwdriver
M6 x 12mm Bolts M8 Full Thread Studs
M8 Nuts
M8 Washers
14 M6 x 12mm Bolt
4 M8 Nut
INS_814-6820-0_Side Isle_ENG-SPN 2/28/06 10:34 AM Page 4