User's Manual

3. Please refer to the LED Indicators of Receiver as below:
LED Mode (color) Power LED Devices LED
USB connector plug-in, the LED is always
RED
With signal
RED
ID Non-setting
Without signal
DARK
With signal
ORANGE
ID Setting
Without signal
GREEN
6 Importance & Attention
1. Operating distance—The ‘’
Cyber Voyager Twin Pro’’ guarantee 1.5 meter operating
distance(even to 2 meter), but when the battery low the wireless operating distance will
shorten.
2.
There will be shown two controllers every time when Cyber Voyager Twin Pro is properly
plugged into your PC.
Ensure the ID in control panel is “Controller 1 (2 axis, 12 buttons
controller) ” & "Controller 2 (4 axis, 8 buttons controller) " , if it is properly plugged but does not
work or only shown one controller. *
Note for user: If it seems does not work, please enter the Game Controllers page (Start \ Setting \
Control Panel \ Game Controllers or Joysticks) and select "General" page to check the status. If
there is only one controller or no controller on this page, please remove it from the Game
Controller page. Subsequently re-plug the Cyber Voyager Twin Pro and complete the calibration
procedure, then it will work as usual.
3. Not every game requires all functioning buttons on your Rockfire Cyber Voyager Twin
Pro. If you find some buttons do not work inside the game, please check the software
game setting manual. The function of the gamepad buttons may vary in different games.
Before proceed with game playing, please check from the ‘’OPTION’’ manual inside the
game, and always read your game manual carefully to approach the best game setting.
4. Your Rockfire Cyber Voyager Twin Pro needs little care and services. You may clean it with a
damp cloth periodically. Do not use abrasive cleaners of any type and do not spray liquid cleaners
directly on your gamepad. Any fluid leaks inside the gamepad may cause unexpected damages.