GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the Bench. 2. To avoid damage, assemble the bench on a non-abrasive surface such as carpet. 3. Make sure all bolts and screws tightly fastened before the bench is used. 4. This bench is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts and screws. TOOLS REQUIRED 1. 8" Philips screwdriver (Not provided).
the wooden caps (G) to cover bolts head using Attach the back support (B) and back apron (D2) into right and left side frames (A1 & A2). Secure using 1 1/2" bolts (E) as shown. Secure front apron using 1 1/2" bolts (E) as shown. STEP 5 Next, attach the front apron (D1) into right and left side frames (Al & A2). ** DO NOT TIGHTEN BOLTS YET. Rubber mallet. Tapping in ASSEMBLY COMPLETE! = ~~ Secure the seat (C) using 1" screw (F) into front & back apron and side frames.
MAINTENANCE Due to teak wood's natural characteristics, wood color and grain variations may be present. This is a symbol of the originality of each unit and gives each finished piece a distinctive look and inherent charm. Care Instruction : Teak wood, when left bare and unhanded, will naturally fade to a silver-gray color. This silver-gray color transformation does not in any way affect the durability of the furniture.
1 year Limited Warranty The furniture is warranted to be free from defects in material and workmanship of the original product when purchased from one of our authorized dealers. If a product fails and is under the terms of our limited warranty, the item will be replaced, usually for a small fee. In the case of discontinued models, an item of similar quality and style will be offered to the customer. e 1 year limited frame warranty Frames are warranted to be free from defects in material and workmanship.
