Description : Rectangular Table with Dual Drop Leaf Product Dimension : 36”/54’’x40”x30” Cube Size : 38.7”x38.7”x7.4” NW: 63.8 LBS GW: 73.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time to read and follow the assembly instructions carefully. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and count all parts and metal hardware. Compare with the part list to be sure all parts are present.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty 1 Bolt (M8x70) 3 Sketch NO Description Qty 8 2 Lock washer ( Φ8.5xΦ13mm) 8 Flat Washer ( Φ8.5xΦ19mm) 8 4 Allen key (M4mm) 1 5 Screw (M4x15) 18 6 Drop leaf Support Stopper 4 7 Screw (M3.5x20) 8 Sketch STEP 1 Attach drop leaf support stoppers (6) to the drop leaves (T2).
STEP 2 Attach two drop leaves (T2) to the center piece top (T1). Use the screw driver to tighten the screws (5). as shown below. STEP 3 Attach the four legs (B) to the center piece top with Bolts (1) and washers (2), (3). Tighten with Allen Key (4).
