Assembly Instruction

4of7

Figure 4

STEP 4 Attach Shade to Fixture Body-

A. J

Attach the Cage (I) with Panels ( ) onto the bottom of the

Fixture Hood as shown. Line up hole on the top edge of

the Cage (I) and ounting oles on the bottom edge of

the Fixture Hood. Secure with Lock Screws ( ) . Tighten

until snug.

Fixture Hood

Mounting Hole

Hole

Cage

Lock Screw

Figure 5

STEP 5 Attach Lanyard-

A. The purpose of the lanyard is to provide the installer a

means to support the fixture from the junction box while

connecting the electrical wires. This enables the fixture

to hang from the junction box and your hands are free to

make the wire connections.

B. TurntheButtonStopsoitmaybeinsertedintothe

crossbar slot. Make sure the Button Stop is completely

inside the crossbar. Slowly release the fixture to make

sure it is supported by the Button Stop. Proceed to the

wiring steps. Once you are complete with the wiring

there is nothing to do with Lanyard. The Lanyard will

push into the junction box when the fixture is placed for

final mounting.

Crossbar

Button Stop

Lanyard

Slot

Assembly Instruction Sheet

Thank you for purchasing our product.

Need assistance with parts or assembly? Call our customer service or visit our website.