Assembly Instruction

6of7
STEP 10 Apply Silicone Sealer to Mounting
Balls
-
A. To prevent moisture from entering the wire
compartment, apply a small amount of silicone sealer
(not included) to the threaded side of the mounting
balls (E) and then install them onto the mounting
screws (B). Wipe off excess caulk.
Mounting Ball
Figure 11
STEP 9 - Photocell Switch Cover
A. A Photocell Switch Cover is provided in the case that
your light requires additional shielding from the fixture
light in order to operate correctly.
Locate the Photocell Switch on your fixture and simply
push the Photocell Cover onto the Photocell Switch. Be
sure to orient the cover so that the cover is blocking the
light from the fixture.
Figure 9
STEP 8 - Install Bulb
A.
base
This fixture uses CFL Spring Self-ballasted bulb with GU
24 . Maximum 13 watts.
B. Install the Lamp into the Socket Base by aligning the pins
on the Lamp with the keyholes in the Socket Base. Once
they are aligned, gently push the Lamp into the keyholes
and twist the Lamp to lock it in place.
PHOTO CELL
PROTECTIVE
COVER
Push
PHOTO CELL
Figure 10
Bulb
Socket
Assembly Instruction
Thank you for purchasing our product.
Need assistance with parts or assembly? Call customer service