Assembly Instruction

ManualsBrandsCharlton Home ManualsCeiling LightsTussey 1 - Light Unique / Statement Drum Pendant

ASSEMBLY INSTRUCTION

NOTE: 1.The fixture can be assembled as mini pendant OR hanging pendant .If assembling as hanging

pendant, the consumer needs to buy the pendant hardware kits separately.

2. Please consult a qualified electrician if you are not certain of the installation or service.

CAUTION: Before starting the installation or service, disconnect the power by turning off the circuit

breaker or by removing the fuse at the fuse box.

※ Installations for mini pendant

1. Carefully unpack the fixture, lay out all parts on a clean surface.

2. Fasten the mounting strap onto the outlet box by using provided 2 outlet box screws.

3. Fasten the nipple A into the bushing. Screw the nipple B to the tube A , screw the tube B to the nipple.

4. Tie the ground wires from fixture and from outlet box to the ground screw on the mounting strap.

Connect the wire without writing on it (with raised ribs) from the fixture to the white wire (neutral wire)

from the supply circuit. Connect the wire with writing on it from the fixture to the black wire (live wire)

from the supply circuit. Cover the connections using provided wire connectors. Position wires back

inside outlet box.

5. Place the canopy to the outlet box by aligning the protruding mounting screws all the way through the

canopy and tighten the fixture using lock nuts provided until fixture body is held firmly.

6. Unscrew the socket ring and socket cover from the socket. Place the shade A and shade B and socket

cover over the socket, refasten the socket ring to secure it.

7. Install the bulb (Not included). Turn on the power.

Summary of content (4 pages)

PAGE 1
ASSEMBLY INSTRUCTION NOTE: 1.The fixture can be assembled as mini pendant OR hanging pendant .If assembling as hanging pendant, the consumer needs to buy the pendant hardware kits separately. 2. Please consult a qualified electrician if you are not certain of the installation or service. CAUTION: Before starting the installation or service, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. ※ Installations for mini pendant 1.
PAGE 2
INSTRUCCIÓN DE ASAMBLEA NOTE:1. La instalación puede ser montada como semiflujo o Colgante mini. Si se monta como pendiente colgante, el consumidor tiene que comprar a parte los kits de ferretería del pendiente. 2.Por favor, consulte con un electrcista cafificado en caso de que no esté seguro de la instalación. CAUCIÓN: Antes de comenzar la instalación, cortar la electricidad mediante apagar el cortacircuitos o quitar el fusible desde la caja de fusible. ※ Installaciones para el Colgante mini 1.
PAGE 3
ASSEMBLY INSTRUCTION ※ Installations for hanging pendant 1. Carefully unpack the fixture, lay out all parts on a clean surface. 2. Fasten the mounting strap onto the outlet box by using provided 2 outlet box screws. 3. Fasten the loop to the nipple A. Fill holes of the canopy B with the Screws and Lock Nuts provided in the pendant hardware kits. 4. Screw the nipple B into the bushing, screw the nipple C into the tube A, screw the tube B into nipple D. 5.
PAGE 4
INSTRUCCIÓN DE ASAMBLEA ※ Installaciones para el pendiente colgante 1. Desempaquetar cuidadosamente la instalación, disponer todas las piezas sobre una superficie límpia. 2. Abroche la correa de montaje a la caja de salida usando los dos tornillos de la caja de salida. 3. Apriete el Lazo a la Entrerrosca A. Llenar el agujero con Tornillos y Tuercas de Cierre B proporcionados en los kits de la ferretería del pendiente y después atornillar el Lazo . 4. Atornillar la Entrerrosca B al Buje.