Assembly Instructions SPACE SAVER % A A Carefully unpack and Identity each component before beginning assembly. Before you begin, please refer to parts list to make sure that you have all parts. Please take care when assembling the unit and always place the parts on a clean, soft surface.
In Step 1 you need First screw cam bolt into part A, then slide part C, D into part A, lastly tighten the cam lock until secure. Push cam lock into the hole, then take a Flathead screwdriver (as pictured) and twist 45 degrees until it is locked in place.
In Step 5 you need Note the € bar (the S / bar with two holes) is back facing.
in Step 10 you need For your safety, please secure anchor-strap to a wall thoroughly.
