Assembly Instructions

ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS: Please use the hardware and accessories included in the set. DO NOT use other electrical or manual tools.
In order to facilitate the assembly and make your final product firm and stable, please tighten by a few rounds each screw one by one. After all screws are connected,
then you start to tighten each screw to the end.
DO NOT tighten any screw to the end before you’ve connected all screws.
The assembly requires minimal level of DIY skills if you follow the instructions carefully. In case you encounter any difficulty or have any questions, feel free to contact
the store or manufacturer.
C
B
H
D
G G
Part # Reference Image QTY
A
B
C
D
E
F
G
H
I
1
1
1
1
1
1
10
6
1
M6*20
M6*30
STEP 1
Connect chair seat base (B) with armrests (C and D). M6*20 bolts (G) and M6*30 bolts (H) are used.
Please do not tighten bolts to the end at this step.
Connect chair back (A) with armrests (C and D). M6*30 bolts (H) are used.
Please do not tighten bolts to the end at this step.
Connect chair front and back beams (E and F) with armrests (C and D). M6*20 bolts (G) are used.
Make sure all bolts are inserted properly, then thighten all bolts.
Finish and enjoy your chair.
STEP 2
STEP 3
STEP 4
C
B
A
H H
G
G
G
F
E