Installation Instructions

Outdoor
GP I :ENERAL RODUCT NFORMATION
This product is safety listed for wet locations.
Incandescent lamps may be dimmed with a standard incandescent
dimmer. LED lamps may be dimmed with a LED dimmer. Consult
lamp manufacturer for additional information.
This instruction shows a typical installation.
1
2
3
4
5
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage Information.
Install all glass panels by carefully sliding them into the fixture and securing them using the clips.
Place the cover over the frame and secure it in place with the cover screws.
6
7
CAUTION RISK OF FIRE-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1A
1
POST
POST SCREW
2
44
CLIP
GLASS PANEL
6
COVER
FIXTURE
3
5
7
7
COVER SCREW
LAMP
Outdoor Post
All rights reserved.
Installation Instructions
SAVETHESE INSTRUCTIONS!