Installation & Assembly

page 2
Assembly Instructions
POST MOUNT
STEP 2
Connect the positive, negative and ground wires with the
supplied wire nuts. Secure with electrical tape
Connect Clear, Brown, Gold or
Black Parallel Wire without tracer
(round & smooth) or Black Fixture
Wire to:
Black or Red Supply Wire or
Insulated Wire (other than green)
with copper conductor.
Connect Clear, Brown, Gold or
Black *Parallel Wire with tracer
(square & ridged) or White Fixture
Wire to:
White Supply Wire or Insulated
Wire (other than green) with silver
conductor
Copper
Silver
Smooth
Ridged
STEP 1
Install a bulb and secure the fixture top to the
fixture.
STEP 3
Install the fixture to the pole or base (not included) and secure
with the pre-assembled screws.