Assembly Instruction

PAGE 1
ASSEMBLY INSTRUCTION SIDE CHAIR ‘ DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED #. to insure proper assembly. do not filly tighten screws until chapatis fully assembled. Tighten the screws about 86 % during assembly process b, place char on flat surface and stadium seat and fees until the chair sits even on the floor, t. alter the chair is level, tighten the scows o, screws will loosen with time and usage, periodically check and lento the screws.
PAGE 2
STEP 2 A: Put chair back (A) on a smooth flat surface, Attached the seat (B) with 2 front legs to the chair back (A). use the bolt (F), lock washer (D), Flat washer (E) STk in both of hole of seat (B) and chair back (A); turn the Allen S wrench (1) in bolt (F). But not ' 5;5‘ A too tight. B: Use the b 0 ), lock washer (D), flat washer (E) in both of hole of seat (B) and chair back the Allen wrench (1) to tighten the Bolt (G). C: Tighten all of bolt.