Assembly Instructions

7
7
7
7
7
7
M
N
O
P
L
J
20
Diagram #4
REQUIRED HARDWARE IN THIS STEP
NO. DESCRIPTION SKETCH
QTY
13
WOOD SCREW
6
7. Turn the chair upright. Make sure the assembled chair unit is level
and square. Tightly fasten all bolts with the open-end wrench (4).
8. Secure the front and side crossbars (P) to their chair legs with
6 wood screws (13).
Note: Screwing the wood screws (13) to secure the front crossbar (O)
by first. Then make sure the small holes on the bottom of side
crossbars (P) are partial inside, screwing the wood screws (13)
to secure the side crossbars (P).
CHAIR ASSEMBLY INSTRUCTIONS