Assembly Instructions

13
L
K
J
18
Diagram #2
2. Place seat board (K) upside down on a non-abrasive table surface.
The rear (tapered end) of the seat board (K) should be near the table
edge.
Hint: Protect the non-abrasive table surface and seat board (K) by laying
a towel in-between the chair seat and table.
3. Place the assembled chair frame on the seat board (K) as shown.
Attach with 6 wood screws (13).
REQUIRED HARDWARE IN THIS STEP
NO.
DESCRIPTION SKETCH
QTY
13
WOOD SCREW
6
13
13
13
13
CHAIR ASSEMBLY INSTRUCTIONS