Assembly Instructions

Install the first Front Leg(C) into the base of the Seat(B) by placing one Gasket(①) onto the threaded stem.

Insert the threaded stem of the Front Leg(C) into one of the front mounting positions of the Seat(B), then

tighten by turning the Leg clockwise until it is completely secure.

Repeat this process with the remaining three Legs.

Note: The use of the Gaskets are OPTIONAL and are especially useful to help alleviate slight

wobbles. Some Legs may need more than one whilst some Legs may not need any.

With assistance from an adult partner, lift the Backrest(A) up.

Align the Rails on the Backrest(A) and Seat(B).

Note: Make sure the Rails on the Backrest(A) locks into the Rails on the Seat(B).

Step 2

Step 3

Use Gaskets(①)

to achieve stablity

Rail on Seat(B)

Rail on

Backrest(A)

Front Leg(C)

Back Leg(D)

Seat(B)

Gasket(①)

Backrest(A)

Seat(B)

Back Leg(D)

Front Leg(C)

Page 4 OF 6