Owner's Manual

A helper is recommended for the installation of the vanity top. Apply a ¼" bead
of silicone latex caulk to the top edge of the vanity. The Caulk will adhere the Marble
Top to the vanity. Place the top onto the vanity. Make sure the top is centered or as
close as possible to its final location. Avoid moving the top as much as possible
once it is set into place. Once the top is set into place avoid moving the top.
Caution: always carry any natural stone product vertically as much as possible.
Clean up any excess chalk with a clean damp rag.
Step 3-Installation of Black Splash
Apply 2 beads of clear silicone latex caulk to the back of the splash and 1 to the
bottom of the back splash. Carefully set the back splash into place (centered on the
top) and push firmly against the wall. Clean up any excess caulk with a clean damp
rag.
Step 4-Drying Time
Avoid moving the top. Make sure and allow the top dry for at least 24. This will
ensure proper adhesion to the vanity.
Cleaning and Polishing
2／3