Installation & Assembly

page 2

SEMI-FLUSHMOUNT

Assembly Instructions

STEP 2

Use the mounting screws to attach the mounting unit to the

junction box

STEP 3

Make the electrical connection from the junction box to the

ﬁxture. Connect the ground wire to the mounting unit using the

preinstalled green ground screw. Then, connect the positive,

negative and ground wires with the supplied wire nuts. Secure

with electrical tape

Connect Clear, Brown, Gold or

Black Parallel Wire without tracer

(round & smooth) or Black Fixture

Wire to:

Black or Red Supply Wire or

Insulated Wire (other than green)

with copper conductor.

Connect Clear, Brown, Gold or

Black *Parallel Wire with tracer

(square & ridged) or White Fixture

Wire to:

White Supply Wire or Insulated

Wire (other than green) with silver

conductor

Copper

Silver

Smooth

Ridged

STEP 3

Place the ﬁxture over the mounting unit and

secure with the cap nuts. Install a bulb (not

included) and cover with the shade. Secure

assembly with the ﬁnial.